The Victron Energy SmartSolar MPPT 150/70-Tr VE.Can uses the newest and fastest technology to convert energy to charge battery banks. This charge controller will even charge very low battery levels.
Features
Ultra-Fast Maximum Power Point Tracking (MPPT)
Advanced Maximum Power Point Detection in case of partial shading conditions
Flexible Charge Algorithm
Bluetooth Smart built-in (control and monitor remotely)
Internal temperature sensor
Fully discharged battery recovery function
Remote on-off
Specifications
Battery Voltage: 12V/24V/48V Auto Select (software tool needed for 36V)
Rated Charging Current: 70A
Maximum PV Short Circuit Current: 50A
Maximum PV Open Circuit Voltage: 150V
Nominal PV Power (12V System): 1000W
Nominal PV Power (24V System): 2000W
Nominal PV Power (36V System): 3000W
Nominal PV Power (48V System): 4000W
Operating Temperature Range: -30 to 60°C (-22 to 140°F)
Maximum Efficiency: 98%
Self-Consumption: <35mA @ 12V / 20mA @ 48V
Data Communication Port: VE.Can, VE.Direct or Bluetooth
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V.
2) A PV array with a higher short circuit current may damage the controller.
3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels Maximum current per MC4 connector: 30A (the MC4 connectors are parallel connected to one MPPT tracker).